Table of Contents
Advertisement
Figure 139. Installing the expansion card riser (Riser 1)
Removing a GPU
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If applicable, disconnect the cables from the expansion card.
4.
Remove the GPU air shroud top
5.
Remove the full length expansion card
Steps
1. To remove the GPU from Riser 1:
a. Tilt the expansion card holder latch on the riser.
b. Press the tab, and pull the card holder from the riser.
c. Hold the GPU card by the edges and pull the card from the riser.
d. Disconnect the GPU power cable from the GPU card.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
150
Installing and removing system components
Safety
instructions.
Before working inside your
cover.
riser.
system.
Advertisement
Table of Contents
