Table of Contents
Advertisement
Figure 81. Removing the Xeon Max retaining clip
Installing the processor
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the air shroud
Steps
1. Place the processor in the processor tray.
NOTE:
Ensure the pin 1 indicator on the processor tray is aligned with the pin 1 indicator on the processor.
2. Place the retaining clip on top of the processor in the processor tray aligning pin 1 indicator on the processor.
NOTE:
Ensure the pin 1 indicator on the retaining clip is aligned with the pin 1 indicator on the processor before placing
the retaining clip on the processor.
NOTE:
Before you install the DLC module, ensure to place the processor and retaining clip in the tray.
104
Installing and removing system components
Safety
instructions.
Before working inside your
or
remove the GPU air
shroud.
system.
Advertisement
Table of Contents
