Table of Contents
Advertisement
MN003441A01-AP
Chapter 7 : Advanced Features
7.25.5
Stopping SSA Notification of a Single Site
Procedure:
1
or
to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3
or
to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4
or
to select the desired Site Alias and press the Menu Select button directly below
Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req successful.
If the site is not available, the display shows <Site Alias> not available.
If the site does not exist, the display shows <Site Alias>does not exist.
5 To return to the Home screen, press the Menu Select button directly below Exit.
The SSA Alert for the designated site stops.
7.25.6
Stopping SSA Notification of a Single Site by Manual Entry
Procedure:
1
or
to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3
or
to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4
or
to [SiteID Entry] and press the Menu Select button directly below Edit.
The display shows the Enter SiteID screen.
5 Key in the required Site ID and press the Menu Select button directly below Send.
One of the following scenarios occur:
•
If a wrong Site ID is entered, the display shows Invalid ID and prompts to enter the Site
ID again.
•
If a correct Site ID is entered, the display shows Sending req.
•
If the request is successful, the display shows Req successful.
•
If the single site is not available, the display shows <Site ID> not available.
112
Advertisement
Table of Contents
