Turning On The Radio; Adjusting The Volume - Motorola APX 900 User Manual

2.6

Turning On the Radio

Procedure:
1 Rotate the On/Off/Volume Control Knob clockwise until you hear a click.
• If the power-up test is successful, the display shows Motorola Solutions logo momentarily,
followed by the Home screen and the Codeplug Alias.
• If the power-up test is unsuccessful, you see Error XX/YY (XX/YY is an alphanumeric
code).
NOTE:
If the radio fails to power-up after repeating a few times, record the Error XX/YY code
and contact your dealer.
Codeplug Alias feature is enabled through Customer Programming Software (CPS)
configuration to display the codeplug alias as a temporary text during power on.
2 To turn off the radio, rotate the On/Off/Volume Control Knob counterclockwise until you hear a
click.
2.7

Adjusting the Volume

When and where to use:
Ensure the radio is powered on.
Your radio is preprogrammed to reset to medium volume rate, which is Level 12, by default every time
the radio powers up.
Procedure:
1 To increase the volume, rotate the On/Off/Volume Control Knob clockwise.
2 To decrease the volume, rotate the knob counterclockwise.
MN003441A01-AP
Chapter 2 : Getting Started
19