Motorola APX 900 User Manual page 34

Table of Contents

Advertisement

MN003441A01-AP
Chapter 4 : Status Indicators
You Hear
Tone Name
Unique,
New Message
Low-Pitch-
ed Chirp
Unique,
Priority Status
High-Pitch-
ed Chirp
Incremen-
Bluetooth Paired
tal- Pitched
Bluetooth Connected
Tone
Decremen-
Bluetooth Unpaired
tal- Pitched
Bluetooth Disconnec-
Tone
ted
A Group of
Fall Alert Continuous
Very High-
Tone
Pitched
Tones
Critical Fall Alert Con-
tinuous Tone
You Hear
Tone Name
Short, Low-
Radio Self Test Fail
Pitched
Reject
Tone
Time-Out Timer Warn-
ing
No ACK Received
Individual Call Warn-
ing Tone
Long, Low-
Time-Out Timer Timed
Pitched
Out
Tone
Talk Prohibit/PTT In-
hibit
Lack of Voice PTT
Time out
Out of Range
Invalid Mode
A Group of
Busy
Low-Pitch-
ed Tones
Short, Me-
Valid Key-Press
dium-Pitch-
Radio Self Test Pass
ed Tone
34
Heard
When a new message is received.
When a priority message is received.
When Bluetooth accessory is paired with the radio.
When Bluetooth accessory is connected to the radio.
When Bluetooth accessory is unpaired from the radio.
When Bluetooth accessory is disconnected from the
radio.
When radio is in Fall Alert mode and prepares to trans-
mit Emergency Alarm when the timer of this alarm
ends.
When radio is in Fall Alert Enhanced mode and pre-
pares to transmit Emergency Alarm when the timer of
this alarm ends.
Heard
When radio fails its power-up self test.
When an unauthorized request is made.
Four seconds before time out.
When radio fails to receive an acknowledgment.
When radio is in an individual call for greater than six
seconds without any activity.
After time out.
(When PTT button is pressed) transmissions are not
allowed.
When the radio ends your call after it detected there
are lack of voice for five seconds after the PTT is
pressed and hold. Your radio ends the call to enable
your radio to receive calls from other radio users.
(When PTT button is pressed) the radio is out of range
of the system.
When radio is on an unpreprogrammed channel.
When system is busy.
When a correct key is pressed.
When radio passes its power-up self test.

Advertisement

Table of Contents
loading

Table of Contents