Table of Contents
Advertisement
MN003441A01-AP
Chapter 5 : General Radio Operation
•
For Trunking system, the display shows the caller alias or ID.
Procedure:
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
2 Wait for the Talk Permit Tone. Then, press the PTT button to respond to the call.
The LED lights up solid red.
3 Release the PTT button to listen.
5.5.2
Receiving and Responding to a Private Call (Trunking Only)
A Private Call is a call from one individual radio to another. Other users in the current talkgroup
cannot hear the one-to-one call between the two radios. The calling radio automatically verifies that the
receiving radio is active on the system and can display the caller ID.
When and where to use:
When you receive a Private Call, you hear two alert tones and the LED blinks green. The display
shows Call received and the call received icon blinks.
Procedure:
1 Perform one of the following actions:
•
Press the Menu Select button directly below Resp.
•
Press the Call Response button within 20 seconds after the call indicators begin.
If the caller alias is in the call list, the display shows the caller alias during the call.
If the caller name is not in the call list, the display shows the caller ID.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
3 Press
or the Call Response button to hang up and return to the Home screen.
5.5.3
Receiving and Responding to a Telephone Call (Trunking Only)
This feature allows you to receive calls similar to standard phone calls from a landline phone.
When and where to use:
When you receive a Telephone Call, you hear a telephone-type ringing and the LED blinks green. The
display shows Phone call and the call received icon blinks.
Procedure:
1 Press the Call Response button within 20 seconds after the call indicators begin.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
3 Press
or the Call Response button to hang up and return to the Home screen.
5.6
Methods to Make a Radio Call
You can select a zone, channel, subscriber ID, or talkgroup by using:
•
The 16-Position Select Channel Knob.
40
Advertisement
Table of Contents
