Changing Password (Optional); Selecting A Channel Within A Zone; Changing A Channel Parameter - Motorola APX 900 User Manual

MN003441A01-AP
Chapter 7 : Advanced Features
4 Press OK.
The radio displays Radio Param and Zn/Ch Param.
7.26.17.2

Changing Password (Optional)

Radios from the Motorola Solutions factory are provisioned with a blank password.
Prerequisites: To access the protected channels, press OK when the Enter Old Password
prompts you to change the password.
Procedure:
1 Press EDIT.
2 Enter the old password.
3 Enter the new password.
4 To accept the entry, enter the new password again.
7.26.17.3

Selecting a Channel within a Zone

Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3 Press or
4 Press or
5 Press or
parameter.
The radio displays the channel parameter screen.
6 Press or
7.26.17.4

Changing a Channel Parameter

Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3 or to scroll through the various information.
4 Press EDIT to edit the channel parameter.
5 Change the parameter value.
6 Press OK to accept the parameter change and return to view mode.
7 Perform one of the following actions and proceed to the next step:
• or to select other channel parameters.
124
to select Zn/Ch.
to select the required zone and press SEL to view the channels.
to select the required channel and press SEL to access the channel
to select the required channel parameter.