Table of Contents
Advertisement
•
A preprogrammed button.
•
The Contacts list (see
5.6.1
Making a Talkgroup Call
Procedure:
1 Turn the 16-Position Select Channel Knob to select the channel with the desired talkgroup.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
3 Press the PTT button to make the call.
The radio shows different indicators based on the system the radio is configured.
•
For ASTRO Conventional system, the LED lights up solid red. The display shows the
talkgroup alias or ID.
•
For Trunking system, the LED lights up solid red.
4 Wait for the Talk Permit Tone.
5 Speak clearly into the microphone.
6 Release the PTT button to listen.
5.6.2
Making a Private Call (Trunking Only)
When and where to use: This feature allows you to send an individual Call Alert or page if there is no
answer from the target radio.
Procedure:
1
or
to Call , and press the Menu Select button directly below Call .
The display shows the last transmitted or received ID.
2 To select the required ID, perform one of the following actions:
•
Press the Menu Select button directly below Cnts to scroll through and select the required
ID.
•
Press the Menu Select button directly below LNum to go to the last number dialed.
•
or
to the required ID.
•
Use the keypad to enter the required ID.
3 Press the PTT button to initiate the Private Call.
The display shows Calling... <Number>.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
When you are connected, the display shows the ID of the target radio.
If no acknowledgment is received, the display shows No acknowledge.
5 Press and hold the PTT button to talk. Release the PTT button to listen.
6 Press
to return to the Home screen.
Viewing Details of a Contact on page
MN003441A01-AP
Chapter 5 : General Radio Operation
58).
41
Advertisement
Table of Contents
