Table of Contents
Advertisement
7.28.5
Stopping SSA Notification of a Single Site
Procedure:
1.
or to SSA.
2. Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3.
or
to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4.
or
to select the desired Site Alias and press the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req
failed.
If the request is successful, the display shows Req successful.
If the site is not available, the display shows <Site Alias> not available.
If the site does not exist, the display shows <Site Alias>does not exist.
5. To return to the Home screen, press the Menu Select button directly below Exit.
Result: The SSA Alert for the designated site stops.
7.28.6
Stopping SSA Notification of a Single Site by Manual
Entry
Procedure:
1.
or to SSA.
2. Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3.
or
to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4.
or
to [SiteID Entry] and press the Menu Select button directly below Edit.
The display shows the Enter SiteID screen.
5. Key in the required Site ID and press the Menu Select button directly below Send.
One of the following scenarios occur:
●
If a wrong Site ID is entered, the display shows Invalid ID and prompts to enter the Site ID
again.
●
If a correct Site ID is entered, the display shows Sending req.
●
If the request is successful, the display shows Req successful.
MN004482A01-AN
Chapter 7: Advanced Features
129
Advertisement
Table of Contents
