Table of Contents
Advertisement
OPTIONS
Using the Turbo function
You can set the Turbo function to provide fast and powerful cooling (heating) .
When the air conditioner is operating in Cool or Heat mode;
Remote controller display
System_WRC_IB_DB68-05423A-00_EN.indd 17
1 . Press the Options button .
2 . Press the <, > or Options button until (Turbo) indicator starts to blink .
3 . Press the SET button to set the Turbo function .
- (Turbo) (Turbo) indicator will be displayed on the remote controller display
and Turbo function will operate for 30 minutes .
f Press the Options button press the <, > or Options button to
X
Cancel
make the (Turbo) indicator blink and press the SET button .
• Turbo function is only available in Cool/Heat mode .
• If the Turbo function is selected while Quiet function is on, the Quiet
NOTE
function will be cancelled .
• Air flow direction can be adjusted with every direction .
❋ ❋ Duct type model cannot adjust air flow direction up and down .
• Temperature and fan speed cannot be adjusted .
ENGLISH-17
2017-02-13 오후 5:04:37
Advertisement
Table of Contents
