Installing the Wired Remote Control (Continued)
Default setting
��� ���
��� ��� ��� ��� ��� ���
�
� � ��� � � � �
�������
Display
6
E-
MWR-SH00_IM_E_28133.indd
6
Setting the Wired Remote Control Options
Switch
No.
SW1 Cooling and Heating
SW2 Temp. display : °C
Allow wireless remote
SW3
control
SW4
SW5
SW6
SW7
SW8 Master remote control
Wired Remote Control Error Codes
1
The error codes of the indoor and outdoor units are displayed
on the wired remote control. Refer to the indoor and
outdoor unit technical manuals for the error codes reference.
2
The following error codes are related to the wired remote
control.
Explanation
Wired remote control Indoor unit
communication error
Master Slave wired remote control
communication error
Communication packet error
Wired remote control tracking error
No indoor units found
7 Day scheduler error
COM1/COM2 installation error
COM2 dual master error
Excessive indoor unit installation error
Temperature units (Celsius/Fahrenheit)
mixed setting error of installed indoor units
Temperature units (Celsius/Fahrenheit)
setting error
Mater/Slave DIP option setting error
Switch OFF
Cooling Only
Temp. display : °F
Disable the wireless remote
control
-
-
-
-
Slave remote control
When using 2 wired remote
controls to control one indoor unit.
Switch ON
-
-
-
-
Remark
-
-
-
-
-
-
-
-
-
-
2007-06-21
ソタタ・10:49:08