Connect Hae69B To A Computer; Use Ioptron Commander; Connect The Mount Via Commander - iOptron iMate HAE69B Instruction Manual

 Latest mount firmware

6.2. Connect HAE69B to a Computer

Plug a DC12V power into DC12V IN on mount base. Connect the USB 2.0 port on the base to a
computer USB port via a USB-C cable. Flip the ON/OFF power switch to turn on the mount.

6.3. Use iOptron Commander

6.3.1. Connect the mount via Commander

Click on iOptron Commander icon
Commander Connection Setting window will open:
Select "RS-232/USB Port" with "Auto Detection", or click on the RS-232/USB Port pull down menu
to select a COM port manually. The COM6 is selected as shown below.
on desktop to launch the Commander. An iOptron
42