USB2.0 (blue): USB 2.0 for an accessory
USB2.0 (white): USB 2.0 port for an accessory
LAN: Ethernet connection (for customer DIY)
Reset: iMate reset button
TF: TF port for a clss 10 or higher high-speed microSD card, up to 64GB
2.4. HAE69B Mount Control
There are three ways to control an HAE69B mount:
1. Use an 8411 handset;
2. Use a PC/MacOS/Linux/iOS/Android device to connect to the iMate and control the mount using
preloaded, open- source KStars/Ekos planetarium software. A handset is not needed; or
3. Use a PC/MacOS/Linux (including Pi) device to connect to the mount via USB-C port on mount
and control the mount using ASCOM/Commander or INDI drivers. A handset Is not needed.
10