Connect Hae69C To A Computer; Connect The Mount To Commander Via Usb-C Port - iOptron HAE69C Instruction Manual

 Latest mount firmware

5.2. Connect HAE69C to a Computer

5.2.1. Connect the mount to Commander via USB-C port

Plug a DC12V power into DC12V IN on mount base. Connect the USB 2.0 port on the base, or the
USB 2.0 port on dovetail saddle, to a computer USB port via a USB-C cable. Flip the ON/OFF power switch
to turn on the mount.
Click on iOptron Commander icon
Commander Connection Setting window will open:
Select "RS-232/USB Port" with "Auto Detection", or click on the RS-232/USB Port pull down menu
to select a COM port manually. The COM6 is selected as shown below.
Click OK to connect. An iOptron Commander connection panel will display when the computer
connected to the mount.
on desktop to launch the Commander. An iOptron
29