Add Other Devices; Polar Alignment; Other Imate Functions; Imate Dc Power Output Control - iOptron iMate HAE69B Instruction Manual

Hide thumbs Also See for iMate HAE69B:

Table of Contents

4.2.4. Add Other Devices

Please refer to full KStars/Ekos User Manual for more details.

One may use external iPolar, Poalr Alignment routine in KStars/Ekos, or a third party software for

polar alignment.

iMate has three (3) DC12V outputs. DC3 is always on. DC2 and DC1 can be programmed ON/OFF.

From iOptron Applications pull down menu to select Education =>iMatePowerBox. This will bring up the

imatepowerbox screen.

Enter 5 to check the DC1 and DC2 status. "1" is ON and "0" is OFF.

Enter 1 or 2 to turn DC1 power OFF/ON. Enter 3 or 4 to turn DC2 power OFF/ON. Here "1" is

entered and the power box DC1 is turned off.

Table of Contents

Imate hae69b ec