Table of Contents
Advertisement
CSTM: mount us tracking at a customer defined speed.
9. Slew speed: It has 9 speeds: 1X, 2X, 8X, 16X, 64X, 128X, 256X, 512X, MAX.
10. Current Time: display local time in a format of HH:MM:SS.
5.2. Install and Check the Handset Battery
The handset uses a button battery to keep the Real Time Clock running. The battery is a CR2032
Lithium battery, which is not included due to shipping restrictions.
Open the HC back cover with a good, size 1 (4mm) Phillips Screw Driver. With battery + sign facing
up, slide the battery under two small metal hooks on the positive side first. Then push the battery down to
make a good contact. Make sure that two spring contacts on the negative side are underneath the battery. If
none of the metal pins in battery holder can be seen after battery is installed, the battery is not installed
properly.
If the handset can't display the correct date and time, most likely the battery is installed wrong, or
power is low and needs be replaced.
5.3. Connect DC power and handset
Plug the 8411 handset into mount HBX port. Plug DC12V power into DC12V IN on mount base. Flip
the ON/OFF power switch to turn on the mount.
Press an arrow key to slew the mount and press a number key to change the slew speed.
Figure 20. Install a CR2032 battery
Figure 21. Cable connection
31
Advertisement
Table of Contents
