Table of Contents
Advertisement
DC 12V IN: DC power socket to power the mount (5.5mmX2.1mm/5521, center positive)
USB 2.0: USB-C type port for firmware upgrade and computer control
I/O: Power switch
HBX (Handbox): For connecting to an 8411 handset
ST-4: ST-4 compatible autoguiding port. The wiring is shown in Figure 3
Ports on the iMate:
Port #3, 2, 1 above iMate: DC 12V outputs DC3, DC2 and DC1, with 5.5mm/2.1mm sockets.
DC3 is always on, with a 3A max. output current. DC2 and DC1 can be turn ON/OFF via iMate
App, with 2A max. output for each port.
USB3.0: USB3.0 port for an accessory
Figure 3. ST-4 Compatible Guiding Port Wiring
Figure 4. iMate Ports
9
Advertisement
Table of Contents
