Page 1
Hand controller and mount firmware upgrades (check online for the latest version) Computer control Contents and design may change from time to time without notice. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
Page 2
(4) Attach the mount onto the MiniPier. Secure it by tightening the mount locking screw on MiniPier; iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
Page 3
To convert dovetail saddle from a Vixen-type to a Losmandy-type. (1) Remove two socket screws (red circled), flip and move the saddle fixed block outward. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
Page 4
(TIP: After slewing to an object, a list of nearby bright object(s) can be displayed by pressing “?” button.) Set controller: Press the MENU button; then “Settings” => “Set Time & Site”. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
Page 5
It is recommended to return the mount to Zero Position at the end of the observing session. support@ioptron.com for technical supports. Rev. 1.0 December 2022 iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for two years. iOptron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workmanship. As a condition to the obligation of iOptron to repair or replace such product, the product must be returned to iOptron together with proof-of- purchase satisfactory to iOptron.