Table of Contents
Advertisement
Caution:
!
If you open the printer cover while the power is on, the buzzer sounds, so wait until the print
head moves and comes to a stop.
2. Make sure that the print head is near the center, and then turn off the printer.
Warning:
!
If you have just used the printer, the print head may be hot; let it cool for a few minutes
before replacing the ribbon cartridge.
Caution:
!
Performing the following steps with the printer turned on may cause a malfunction.
Be sure to turn off the printer.
3. Pull the paper bail forward.
Secure it in place by moving it forward until the front edge lowers and comes to a stop.
4. Grasp the ribbon guide and pull it until it is out of the print head.
LQ-690II/LQ-690IIN
User's Guide
Options and Consumables
102
Advertisement
Table of Contents
