Table of Contents
Advertisement
Settings
*
Draw Borders
Paper Source
User Defined Paper
Offset
Paper Size
*
Copy Count
Graphic - Print Quality
*
Advanced Printing Features
*
Pages per Sheet Layout
Halftoning
*
Print Optimizations
Print Speed
Print Direction
Printable Area
Top Margin Priority
Explanations
Select to print a border around the pages.
Select the paper source you want to use.
If your paper is not included in the Paper Size drop-down list, you can add the size
to the list. For more details, see Help for the printer driver.
This setting allows you to offset the image on the page. That is, you can adjust the
position of the printed image. If the offset you specify moves a portion of the image
out of the printer's printable area, that portion will not be printed.
Select the size of the paper you want to use. If you do not see your paper size, use
the scroll bar to scroll through the list. If your paper size is not included in the list,
see "Definition of Custom Paper Size" on page 56 for instructions.
Select the number of copies you want to print. When you select more than one, this
check box is displayed and you can select whether to collate the copies.
Select the printing resolution you want. The higher the resolution you select, the
more detailed your printout will be; however, increasing the resolution slows print-
ing.
Select Enable or Disable for the metafile Spooling.
Select the layout direction for the pages you want to print.
Select the type of halftoning to use when printing graphics. To let the printer deter-
mine the best halftone quality, use Auto Select.
Select Disable when the printer does not use the device fonts and select Enable
when the printer uses the device fonts.
This setting allows you to select print speed. When Standard is selected, prints in
standard printing mode. When High Speed is selected, prints in high speed printing
mode.
This setting allows you to select bidirectional printing. Selecting the Printer Setting
will use the setting stored in the printer. Selecting Bidirectional will print in bidirec-
tional printing mode. Selecting Unidirectional will print in unidirectional printing
mode.
Make sure that Bi-d is selected as the Print direction setting stored in the printer.
Otherwise this setting is ignored by the printer.
If Standard is selected, the normal printable area for Epson impact printers is used.
If Maximum is selected, the printer's maximum printable area is used.
Select which setting for the print start position is to be used; driver setting or printer
setting. For more details, see Help for the printer driver.
LQ-690II/LQ-690IIN
User's Guide
Printer Software
55
Advertisement
Table of Contents
