KICKPL ATE INS TALL ATION
The kickplate (see fig. 1) is shipped unattached to
the unit to allow easy access for leveling the unit. The
kickplate attaches to the unit with magnets (see fig. 2)
located on either side at the bottom of the unit.
FIG. 1.
The kickplate.
TEC_TM_236 REV. A_EN
I N S T A L L A T I O N
INSTALLATION
After leveling the unit, position the kickplate at the
bottom of the unit's front. See fig. 3.
REMOVAL
Pull the kickplate away from the unit.
FIG. 2.
The magnets. One side shown.
09/07/2023
FIG. 3.
Installed kickplate.
T R- 3 0 RBF IN STA L L M A NUA L
Page 25 of 56