True RESIDENTIAL TR-30RBF Install Manual & User Manual page 34

1. Remove the shelf shipping clips. See fig. 3.
2. Remove the shipping tape from the shelf.
NO T E: T RUE R EC OMMEND S P UL L ING T HE
TA P E F R OM T HE T OP.
3. Remove the shelf. See fig. 4.
4. Install the shelf at the desired height.
NO T E: BE SUR E T HE SHEL F I S F UL LY
SE AT ED. SEE F IG. 5. P U SH T HE B O T T OM
TA B S IN WA R D IF T HE SHEL F D O E S NO T SI T
F L AT. SEE F IG. 6.
5. Repeat steps 2-4 for the remaining shelves.
6. Remove the side microfilm. See fig. 7.
FIG. 6. Push the bottom tab inward.
Page 34 of 56 T RUE RE S ID E N TI A L
A P P L I A N C E S E T U P
A
FIG. 3.
A
FIG. 4.
forward (B).
A
FIG. 5.
A: CORRECT;
B: INCORRECT;
FIG. 7.
® 09/07/2023
Remove the shelf shipping clip (A) from the shelf standard (B).
Lift the shelf front up (A). Then, lift the shelf back and pull
Underside view. Left side shown.
Bottom tab is fully seated in the shelf standard.
Bottom tab is not seated in the shelf standard.
Completed shelf installation.
1
2
B
2
1
B
B
TEC_TM_236 REV. A_EN