Table of Contents
Advertisement
INSTALLATION / OPERATION INSTRUCTIONS
OWNERSHIP
To ensure that your unit works properly from the first
day, it must be installed properly. We highly recommend
a trained mechanic and electrician install your TRUE
equipment. The cost of a professional installation is
money well spent.
REQUIRED TOOLS
• Adjustable Wrench
• Phillips Head Screwdriver
• Level
UNCRATING
The following procedure is recommended for uncrating
the unit:
A. Remove the outer packaging, (cardboard and bubbles
or styrofoam corners and clear plastic). Inspect for
concealed damage. Again, immediately file a claim
with the freight carrier if there is damage.
B. Move your unit as close to the final location as
possible before removing the wooden skid.
1
REMOTE UNITS (This section applies to remotes only!)
• Remote cabinets must be ordered as remote. We do
not recommend converting a standard self contained
to remote system.
• All remote cabinets must be hard wired.
• Remote cabinets are not available with castors.
• All remote cabinets come standard using 404A
refrigerant.
• All remote units come standard with expansion valve,
liquid line solenoid, heated condensate pan, and
defrost timer when applicable.
4
INSTALLATION / OPERATION INSTRUCTIONS
2
............ www.truemfg.com ............
True Food Service Equipment, Inc.
Before you start to install your TRUE unit, carefully
inspect it for freight damage. If damage is discovered,
immediately file a claim with the delivery freight carrier.
TRUE is not responsible for damage incurred during
shipment.
NOTE
Keys for freezer with door locks are located in warranty packets.
C. Insert key with lock into the key hole. Turn and pull
the key out. The lock will stay in the key hole.
D. To remove the lock from the key hole simply do the
reverse process. Insert the key into the lock. Turn and
pull the key and lock out of the key hole.
(See images 1-3)
3
• Contact TRUE Technical Service for BTU
requirements.
• No wiring necessary between cabinet and condensing
unit.
• All remote condensing units purchased from TRUE
are 208/230 volts single phase.
If you have any questions regarding this section, please
call TRUE at 1 (800) 325-6152.
4
Hide quick links:
Advertisement
Table of Contents
