Table of Contents
Advertisement
DOOR BINS (SOLID DOORS ONLY)
Door bins are only available for solid door units.
1. Locate the door bins packaged in the top
refrigerator drawer. See fig. 4.
2. Hook the door into the door slots at the desired
height. See fig. 5.
3. Push the door bins down to ensure the tabs are
fully engaged in the slots. See fig. 6.
PRODUCE / CRISPER BINS
The refrigerator section has three drawers. See the
instructions below for drawer removal or reinstallation.
BIN REMOVAL
1. Fully open the drawer.
2. With a Phillips screwdriver, remove the drawer slide
screws. See fig. 7.
3. Lift the drawer from the unit.
BIN INSTALLATION
1. Pull the drawer slides fully forward.
2. Slide the drawer into position until the drawer rests
under the rear hooks on the drawer slides.
3. With a Phillips screwdriver, fasten the drawer to the
drawer slides.
TEC_TM_236 REV. A_EN
A P P L I A N C E S E T U P
FIG. 4.
Door bins packaged in the
top refrigerator drawer.
FIG. 6.
Be sure the door bins are
fully seated.
09/07/2023
FIG. 5.
Hook the door bin into
the door.
FIG. 7.
Drawer slide screw
locations. Top drawer shown.
T R- 3 0 RBF IN STA L L M A NUA L
Page 35 of 56
Advertisement
Table of Contents
