Table of Contents
Advertisement
UNCR ATING (CONT.)
6. Slightly raise the rear leveling leg rollers. Turn the
front adjustment screw 1/4-1/2 turn clockwise.
See fig. 9.
7. With assistance, pull the unit off the back of the
skid. Then, remove the skid and Carefully guide
the unit to a fully upright position. See figs. 10a,
10b, and 10c.
CAUTION!
equipment from the unit's sides, never
the front or rear. See fig. 11. Failure to
do so may result in personal injury or
appliance damage. Do not lift the unit by handles,
doors, or hinges.
Page 20 of 56
T RUE RE S ID E N TI A L
I N S T A L L A T I O N
Only lift with appliance moving
®
adjustment screw
FIG. 9.
Adjustment screw location. Other adjustment screw not shown.
FIG. 10a.
With assistance, carefully walk the appliance partially off the
back of the skid.
1
2
FIG. 10b.
Then, tilt the unit
backward and remove the skid.
FIG. 11.
Only lift with appliance moving equipment from the SIDES,
NEVER
the
FRONT
or REAR.
09/07/2023
1/4 – 1/2 turn
shipping bracket
FIG. 10c.
Carefully guide the
appliance to an upright position.
TEC_TM_236 REV. A_EN
Advertisement
Table of Contents
