In the box
©
English
1 x Amplifier with jumpers
1 x User Guide
The GHV 900 Series is a low noise coaxial House Distribution Amplifier, for use
in smaller to medium CATV distribution networks in multi dwelling houses.
The GHV 900 Distribution Amplifier Series share a modular design with return
path all-on-board for easy setting and installation
Rotary switches and jumpers provide for readable, easy and reproducible setting
of attenuation and equalization, maintaining a non-breakable signal path down-
and upstream to avoid down-time.
Cost optimized 1 GHz technology
•
Downstream 20 to 40 dB amplification / High output level
•
Adjustable attenuation and equalization settings in 1dB steps
•
using rotary switches and jumpers.
Switchable operation modes: VHF Band I (RC=OFF) or 5-65 MHz Return
•
Path (RC=ON)
Selectable Return Path: On/Off, Active/Passive.
•
Upstream switchable amplification ( except GHV 920 )
•
All-on-board return path technology, all features available
•
without module.
Optional Automatic Return-path Activation (ARA) module connector.
•
(Switchable return path blocker for Noise suppression)
All connectors are F-connector female, individually mounted.
•
-20dB input- and output- Test connectors
•
Extensive ESD- and Surge-Protection
•
Unit is Mains fed via an EU-type power plug.
•
High output level low power consumption
•
Copyright © Triax A/S
Copying and distribu on only with prior wri en permission from Triax A/S
Triax A/S, Bjørnkærvej 13, 8783 Hornsyld. www.triax.com
10
GHV 900 Serie