Security Setup - Supermicro SUPER P4SBA+ User Manual

S
UPER P4SBA+/P4SBA/P4SBM User's Manual
[Virus Warning]
This item allows the user to choose the VIRUS Warning feature for
the IDE Hard Drive Disk boot sector protection. If this function is
enabled and someone attempts to write data into this area, then, the
BIOS will display a warning message and the alarm will be set off.
The settings are "Enabled", and "Disabled." The default setting is
"Disabled."
[Boot Up Floppy Seek]
Set this option to "Enabled" to allow the BIOS to test floppy drives
to determine whether they have 40 tracks or 80 tracks. The
settings are "Enabled" or "Disabled." The default setting is
"Enabled."
4-8

Security Setup

When the Item "Security" is highlighted on the main menu bar, press
the <Enter> key to activate the following screen:
[Set Supervisor's Password]
When the item "Set Supervisor Password" is highlighted on the
above screen, press the <Enter> key to activate the following
screen. When prompted, type in Supervisor Password in the
dialogue box to set or to change Supervisor Password.
4-24