Table of Contents
Advertisement
S
UPER P4SBA+/P4SBA/P4SBM User's Manual
Recovery from AC Power Loss
BIOS provides a setting for you to determine how the system will respond
when AC power is lost and then restored to the system. You can choose
for the system to remain powered off (in which case you must hit the
power switch to turn it back on) or for it to automatically return to a power
on state.
See the Power Lost Control setting in the BIOS chapter of this
manual to change this setting. The default setting is Always OFF.
1-3
Special Features
Communication and Networking Riser
The CNR slot supports audio, modem and networking cards and provides
interfaces that support multichannel audio, V.90 analog modems, home net-
working through a telephone line, 10/100 Ethernet-based networking and
future technologies.
the motherboard makes them less sensitive to noise.
1-4
PC Health Monitoring
This section describes the PC health monitoring features of the SUPER
P4SBA+/P4SBA/P4SBM.
chip that supports PC health monitoring.
Seven Onboard Voltage Monitors for the CPU Core, Chipset
Voltage, +3.3V, + + + + + 5V and ± ± ± ± ± 12V
The onboard voltage monitor will scan these seven voltages continuously.
Once a voltage becomes unstable, it will give a warning or send an error
message to the screen. Users can adjust the voltage thresholds to define
the sensitivity of the voltage monitor.
Separating sound and communications systems from
All have an onboard System Hardware Monitor
1-14
Advertisement
Table of Contents
