Table of Contents
Advertisement
Chapter 4: Award BIOS
Main BIOS Setup Menu
Main Setup Features
[Date/Time]
Set the system date and time. Key in the correct information in the
fields when the options of "Month, DD, YYYY" and "HH:MM:SS"
appear in the screen. Press the "Enter" key to save the data.
[Drive A/Drive B]
These options allow the user to set the type of floppy disk drive
installed in the system. The settings are: "None", "360K, 5.25in",
"1.2M, 5.25in", "720K, 3.5in", "1.44M, 3.5in", and "2.88M, 3.5in."
[Swap Floppy Drive]
These options allow the user to swap the names of floppy disk
drives installed in the system, if there are two floppy disk drives
installed on the main board. The settings are: "Disabled" and
"Enabled." The default setting is "Disabled."
[IDE Primary Master/IDE Primary Slave/IDE Secondary Master/IDE
Secondary Slave]
These options allow the user to set the parameters of the IDE
Primary Master/Slave and IDE Secondary Master/Slave slots. Press
"Enter" to activate the following sub-menu screen for detailed
options of these items. Set the correct configurations accordingly.
The items included in the sub-menu are listed below:
4-3
Advertisement
Table of Contents
