Chapter 4: Award Bios; Introduction - Supermicro SUPER P4SBA+ User Manual

4-1

Introduction

This chapter describes the Award BIOS for the P4SBA+/P4SBA/P4SBM.
The Award ROM BIOS is stored in a Flash chip and can be easily
upgraded using a floppy disk-based program.
Note: Due to periodic changes to the BIOS, some settings may have been
added or deleted and might not yet be recorded in this manual. Refer to the
Manual Download area of our web site for any changes to BIOS that are
not reflected in this manual.
System BIOS
The BIOS is the Basic Input Output System used in all IBM
®
and PS/2 compatible computers.
system parameters, such as amount of memory, type of disk drives and
video displays, etc. CMOS requires very little power. When the computer
is turned off, a back-up battery provides power to the BIOS Flash chip,
enabling it to retain the system parameters. Each time the computer is pow-
ered-on, the computer is then configured with the values stored in the BIOS
ROM by the system BIOS, which gains control when the computer is pow-
ered on.
How To Change the Configuration Data
The CMOS information that determines the system parameters may be
changed by entering the BIOS Setup utility. This Setup utility can be ac-
cessed by pressing <Del> at the appropriate time during system boot.
Starting the Setup Utility
Normally, the only visible POST (Power On Self Test) routine is the memory
test. As the memory is being tested, press the <Delete> key to enter the
main menu of the BIOS Setup utility. From the main menu, you can access
the other setup screens, such as the Chipset and Power menus. Section 4-
3 gives detailed descriptions of each parameter setting in the Setup utility.
Chapter 4
BIOS
The AwardBIOS Flash chip stores the
4-1

Chapter 4: Award BIOS

® PC, XT™, AT ® ,