[Resources Controlled By]
The Award BIOS can automatically configure all the boot devices
and all Plug and Play compatible devices. However, if this item is
set to "Auto (ESCD)", the user is not able to set the IRQ DMA and
memory address, since the Award BIOS will automatically assign
the values to these fields. The settings are "AUTO (ESCD)" and
"Manual." The default setting is "AUTO (ESCD)."
[PCI/VGA Palette Snoop]
For best performance of the system, this item has been pre-set to
"Disabled" by the manufacturer.
"Disabled." The default setting is"Disabled."
4-6
Power Management
When the Item "Power" is highlighted on the main menu bar, hit the <Enter>
key to activate the following screen:
[ACPI Function]
This item allows you to enable and disable the function of
Advanced Configuration and Power Management. The settings are
"Enabled", and "Disabled." The default setting is "Enabled."
The settings are "Enabled" and
4-19
Chapter 4: Award BIOS