Regency Ei25 Instructions For Use Manual page 9

Owner's Information
MAINTENANCE
ENSURE THE APPLIANCE IS TURNED OFF BEFORE CLEANING.
GLASS CLEANING
Wipe the glass viewing panel with a damp cloth and buff with a lint free duster.
Caution: Do not use abrasive cleaners on the glass panel. Do not spray liquids directly onto any surface of the unit.
CLEANING THE FUEL EFFECT
Carefully use the glass suction lifter provided to remove the glass by lifting the pins clear of the slots on the front of the appliance.
1.
1
Gently place the glass to one side.
Remove and wash the fuel effect to remove any dust particles.
Alternatively clean with a lint free duster.
Ensure that the effect is dry before replacing.
Replace the fuel effect see Installation Instructions page
16 for layout.
Replace in reverse order.
CLEANING AIR INLETS
Clean the air inlet and outlet grilles regularly with a soft cloth or
the nozzle of a vacuum cleaner.
Dust build-up can inhibit efficient performance of the fan
and lead to the safety cut-out operating.
Keep the area around the appliance clean and free of fluff, dust or
pet hair.
In particular, build-up of dust etc. can occur around the heater
area. Take particular care to keep this area free from such particles
on a regular basis to prevent build-up.
2
Glass suction
lifter
2.
3. To reinstall glass reverse steps 1-2. The glass panel simply seats
into the 4 slots as noted in above diagram. Ensure the suction cup
is safely stored away for future use.
Air inlet
Air Outlet
Glass
Panel
Air inlet
9