Regency Ei25 Instructions For Use Manual page 25

Installer's Information
4-Sided Faceplate Installation
These instructions are for use with the following products:
PART # Description
281-913 Ei29 Faceplate 4-Sided Flush
281-938 Ei29 Faceplate Custom 4-Sided
288-913 Ei25 Faceplate 4-Sided Flush
288-938 Ei25 Faceplate Custom 4-Sided
333-913 Ei33 Faceplate 4-Sided Flush
333-938 Ei33 Faceplate Custom 4-Sided
1. Remove the front glass with the suction cup provided.
2. Using a clean sheet or cardboard on the floor for protection, flip the
unit onto its front face.
3. Remove the four screws supplied with the faceplate.
4. Install the faceplate from the top. Ensure the correct orientation,
with the shorter flange located below the unit.
5. Fasten the four screws on both sides to attach the faceplate.
6. Flip the unit upright. 4-Sided faceplate installed.
25