Table of Contents
Advertisement
OPERATING THE APPLIANCE
- TROUBLESHOOTING
BATTERY
The battery power level is indicated at the top right of the remote
control screen.
Battery Full
Battery Half Power
Battery Empty
NOTE: The remote control has a Battery Status
indicator (top right corner), after an extended
period of displaying empty the LED screen will
cease to function despite the handset still being
able to send commands.
Replace the batteries to restore display.
BATTERY REPLACEMENT
Exhausted batteries are to be removed from the appliance and
safely disposed of.
Slide Cover
Lift Cover
8
No action required
Ensure new batteries are available.
Replace batteries immediately
2 x AAA
2
1
-
Ensure that the handset batteries are new and inserted correctly.
Dispose of old batteries at an appropriate recycling facility.
Battery replacement is recommended after 1 year.
The Remote requires two 1.5V alkaline AAA batteries.
Ensure the correct polarity.
Do not short circuit the terminals.
Do not attempt to recharge non-rechargeable batteries.
Remove rechargeable batteries before charging.
Do not mix old and new batteries.
Remove batteries if the appliance is not used for long periods.
Changing the batteries will not affect the Timer settings.
HEATER RUNNING INDICATORS
When the fan heater is used in conjunction with the flame or
fuel bed effects the heater running indicators will light up for 10
seconds.
The LEDs will illuminate for 10 seconds if the flame or fuel bed
effect is On.
If the fan heater is used independently, the heater running
indicators will stay on.
RESET BUTTON FOR REMOTE CONTROL
If the handset loses signal or needs to be replaced then,
see Servicing Instructions for details.
SIGNAL CODE
The handheld transmitter is configured in the factory with a unique
signal code.
IMPORTANT: If the handset loses signal or needs to be
replaced, see Servicing Section for details.
+
Owner's Information
2
+
1
-
Advertisement
Table of Contents
