Installer's Information
MANTEL CLEARANCES
Combustible mantel clearances from top of finishing trim are shown in the diagram below.
D
A
A
B
C
D
454 mm
235 mm
140 mm
25 mm
Dimensions
(17-7/8 in)
(9-1/4 in)
(5-1/2 in)
(1 in)
Note: Ensure the paint that is used on the mantel and the facing is "heat resistant" or the paint may discolour.
Measurement (A) is shown with 3 sided finishing trim.
If using any of the optional flush faceplate's/backing plates/custom backing plates which have various heights depending
on faceplate chosen, ensure mantel begins above the actual faceplate using the chart above as the mantel cannot overlap
the faceplate Also see faceplate/backing plate sizes in this manual.
17