Regency Ei33 Instructions For Use Manual page 7

Owner's Information
OPERATING THE APPLIANCE
- ADVANCED OPERATION
Temperature Sensor
Convection
Display
Flame
Heating
Temperature
Setting
TURN ON/OFF
Press button to turn on the flame effect.
Press button to turn off all the functions.
FLAME COLOUR ADJUSTMENT
Press button.
There are 5 levels of brightness.
Press the '+' button to increase the flame brightness.
Press the '-' button to decrease the flame brightness.
FUEL BED COLOUR ADJUSTMENT
Press
There are 15 fuel bed colour options, including off.
There are 5 levels of brightness.
Power
Fuel Bed
Timer
Press the '' or '' button to cycle through the fuel bed colour
options.
Press the '+' button to increase the fuel bed brightness.
Press the '-' button to decrease the fuel bed brightness.
Battery Power
TIMER
Actual Room
This setting is only in normal heating control mode. It allows the
Temperature
appliance to be returned to Standby after a set period of time. The
Heating Period
heater must be switched on to use this function.
Press
10 hours. Timer logo and remaining time will show on the screen.
The heater of appliance can be automatically run by using timer.
CHANGE THE TEMPERATURE SETTING BETWEEN
C° & F°
Press the power button to turn on the remote.
Press and hold the
for 3 seconds to change the temperature scale between
C° and F°.
Press the power button to save.
Brightness
Level
to enter the fuel bed light adjustment screen.
to cycle through the setting from Off and 0.5 hours to
left arrow or
''
Brightness
Level
right arrow button
''
7