Regency Ei33 Instructions For Use Manual page 24

Faceplate Surround Installation
These instructions are for use with the following products:
PART # Description
311-927 Ei29 Faceplate Traditional Surround Black
311-928 Ei29 Faceplate Traditional Surround Brushed Antique
Copper
262-927 Ei25 Faceplate Traditional Surround Black
262-928 Ei25 Faceplate Traditional Surround Brushed Antique
Copper
391-927 Ei33 Faceplate Traditional Surround Black
391-928 Ei33 Faceplate Traditional Surround Brushed Antique
Copper
1. Slide the corner clips in on either end.
2. Tighten the top screws (x4).
3. Slide the side pieces on.
24
Installer's Information
4. Tighten the bottom screws (x4).
5. Gently slide the traditional surround on from the top.
6. Insert and tighten the rear screws (x5). Traditional surround
installed.
7. Lift the faceplate and traditional surround up from here and refer to
"Faceplate / Finishing Trim Installation".