Installer's Information
SECURING THE UNIT
The unit can be secured to framing by following the steps below:
1. Place unit in final position.
Note : Ensure unit is plugged in/hardwired and any of the optional faceplate/backing plates has been put into place.
2. With glass removed (see glass removal in this manual) secure unit using wood screws (supplied) and secure to wood studs as per
above diagram.
3. Install Logs (if not installed) and reinstall glass.
Note: If for whatever reason the unit needs to be slid out to gain access for servicing, the 2 x wood screws would need
to be removed in order to slide unit out.
28