Cable Adjustment - CYBEX Eagle Abdominal Owner's Manual

Cable Adjustment

Tools Required
9/16" Wrench (2)
Four types of cable tension adjustment are used on Cybex Strength Systems:
Cable
Adjustment
This type of adjustment uses a jam
nut and a tension adjustment nut at
Jam Nut the cable cam end as the primary
Adjustment adjustment. The other end of the
cable usually contains a roll pin
adjustment.
This type of adjustment uses a
socket head cap screw (SHCS)
securing a cable rod end bearing to
Rod End
the machine. Primary adjustment
Adjustment
is by turning the rod end bearing.
The other end of the cable usually
contains a roll pin cable adjustment.
This type of adjustment uses a roll
Roll Pin
pin and series of holes in the weight
Adjustment
stack top weight connector.
This type of adjustment uses an
Cam End adjustment bolt on the pulley
Adjustment bracket. Loosen nut and rotate cam
bolt to adjust cable.
Cybex Owner's Manual
Description
Jam
Nut
Cable
End
SHCS
Roll
Pin
Nut
26
Diagram
Tension
Adjustment
Nut
Jam Nut
Cable Rod End
Bearing
Nylon
Locknut
Top Weight
Connector
Cam Bolt
Adjustment