Yearly Procedures; Cable Adjustment - CYBEX 16121-999-4 AC Owner's Manual

The following conditions may indicate a worn cable:
Condition of Cable
A tear or crack in the cable
sheath that exposes the
cable
A kink in the cable
A curled sheath
Necking - A stretched
cable sheath
Inspect Other Items
Inspect other items for proper operation, damage, or wear.
Inspection
Inspect grips for looseness or wear.
Inspect all labeling for readability, including instructional placards,
warning and caution decals.
Inspect all weight stacks for proper alignment and operation.
Inspect guide rods for lubrication.

Yearly Procedures

Replace all cables and belts annually

Cable Adjustment

Tools Required
• 9/16" Wrench (2)
• Hammer
• 3/16" Pin punch
Four types of cable tension adjustment are used on Cybex Strength Systems:
Jam Nut Adjustment
This type of adjustment uses a jam nut and a tension adjustment nut at the cable cam end as the primary
adjustment. The other end of the cable usually contains a roll pin adjustment.
Diagram
Replace all loose or worn grips immediately.
Replace all worn labeling immediately.
Correct all improper alignment and operation issues immediately.
Wipe Weight Stack Guide Rods clean over entire length. Lubricate
with a light coat of medium weight automotive engine oil.
Page 17 of 22
Action