CYBEX Eagle Abdominal Owner's Manual page 14

Belt Routing
1. Verify belt is routed through top of pulley bracket and then route end of belt down to the top
weight.
2. Verify that the position of the belt clamp (on the top weight) is aligned properly with the top
pulley bracket (on the machine.) The belt must have a straight path from the pulley to the belt
clamp. Figure shows the top view, looking from the top pulley down to the top plate.
3. Slide belt through slot in belt clamp.
4. Verify belt and insert are installed properly.
5. Pull belt tight and secure belt to clamp with the two set screws. Torque set screws 300-350
in-lbs.
Cybex Owner's Manual
Insert and Set Screws (not
shown) are on this side.
Belt
Increment
Weight
Adjusting
Top Pulley
Knob
Correct belt routing
Insert
Belt
Stem
Belt clamp
insert
Set screws
Wrong belt routing
Insert
Belt
Stem
Belt
Belt clamp
14