Related Manuals for CYBEX Eagle Hip Abduction/Adduction
Summary of Contents for CYBEX Eagle Hip Abduction/Adduction
- Page 1 ® Cybex Eagle Hip Abduction/Adduction Owner’s Manual Strength Systems Part Number 11181-999-4 A www.cybexinternational.com...
- Page 3 ® DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes.
-
Page 5: Table Of Contents
Table of Contents 1 Safety Safety......1-1 Safety Guidelines and Practices ..1-2 Warning/Caution Decals . -
Page 7: Safety
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual 1 - Safety Safety Read the Owner’s Manual carefully before assembling, servicing or using the equipment. It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper operation of the equipment and review all labels. -
Page 8: Safety Guidelines And Practices
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual • Make sure that each machine is set up and operated on a solid level surface. Do not install equipment on an uneven surface. • Make sure that all users are properly trained on how to use the equipment. •... -
Page 9: Warning/Caution Decals
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual 3. Anchoring holes are provided on the feet of the frame. All anchoring locations must be used when anchoring the equipment to the fl oor. 4. Due to the wide variation of fl ooring on which machines may be anchored or installed, verify anchoring method and anchoring fasteners with a qualifi... - Page 10 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual CAUTION Safety Page 1-4...
- Page 11 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Hip Abduction/Adduction - 11181 (Both Sides) DESCRIPTION PART NO. Warning Label ....4605-381-4 Caution Decal ..... 8500-025-4 Caution Decal ..... 8500-026-4 Safety Page 1-5...
-
Page 12: Regular Maintenance Activities
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities. The preventative maintenance actions are described in detail in Chapter 5. -
Page 13: Exercises
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual 2 - Exercise Intended Use MUSCLES USED The intended use of this equipment is to aid or improve general physical fi tness and exercise. For Commercial use. Instructions Read and understand all instructions and warnings Glueteus Medius, Glueteus Maximus, Pireformis Tensor Fasciae Latae, prior to using this machine. - Page 14 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Set Up 1. Hip Abduction - Adjust starting position so knees are together with pads outside knees. Note: Recline back pad to encourge use of the gluteus medius. 2. Hip Adduction - Adjust starting position for a wide “V” position with pads inside knees. Movement 1.
-
Page 15: Customer Service
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual 3 - Customer Service Contacting Service Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239. For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183. -
Page 16: Damaged Parts
5. Forward the package through UPS to Cybex. Attn: Customer Service Department Cybex International, Inc. 1975 24th Ave SW Owatonna, MN 55060 NOTE: Merchandise returned without an RMA number on the outside of the package or shipments sent COD will not be accepted by the Cybex receiving department. -
Page 17: Assembly
Verify that you received the correct color machine that you ordered. Verify you received weight plates and weight plate decals. Verify you received the Cybex Eagle Hip Abduction/Adduction Owner’s Manual. Verify you received the warranty sheet. 3. Move to desired location. - Page 18 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Disconnect weight stack belt (by loosening the two set set screws (2) screws on the belt clamp with a 7/32” Allen wrench). See Figure 1. With an assistant, carefully remove the four BHSCS securing the two halves of the frame.
- Page 19 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Using an external snap ring pliers, remove the upper snap ring from one of the guide rods and carefully lower Frame Upper snap ring the guide rod. See Figure 6. Remove lower snap ring and wave washer from the Wave washer guide rod.
- Page 20 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Install the top two screws securing the back shroud. See Figure 10. Route weight stack belt through the slot in the back shroud (moving from bottom to top). Screw Properly route belt around upper pulley and down to weight stack.
- Page 21 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual 8. Install weight plate decals. Front NOTE: You have the option to use pounds, kilograms or both. Slowly and carefully peel off back side of decal. See Figure 15. NOTE: When peeling off back cover, make Back sure that the decals remain attached to the front sticker.
- Page 22 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual This page intentionally left blank. Assembly Page 4-6...
-
Page 23: Maintenance
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Chapter 5 - Maintenance All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your machines. - Page 24 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual More Difficult Stains • Dampen a soft white cloth with a solution of 10% household bleach (sodium hypochlorite), 90% water. Rub gently. Rinse with a water dampened cloth to remove bleach concentration. • The same procedure can be used with full strength household bleach, if necessary. •...
- Page 25 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual 4. Guidelines for cleaning front panel: • Use clean soft cloths or sponges for application of cleaners and again for washing and rinsing. • Follow up the application with warm water rinse. • Don’t use abrasives or high alkaline cleaners.
-
Page 26: Weekly Procedures
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Weekly Procedures 1. Check all nuts and bolts for looseness. Tighten as required. 2. Inspect all belts (entire length) for any non-uniformity and wear. Immediately replace belt if any of the following conditions are present: Maintenance Page 5-4... - Page 27 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual 3. Some machines use cables in addition to belts. Inspect all cables for wear or damage and proper tension. When inspecting cables, run your fingers on the cable, paying particular attention to bends in the cable and attachment points.
-
Page 28: Yearly Procedures
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual 4. Inspect bars and handles for wear, paying particular attention to tab area connecting points. Replace all worn handles immediately. 5. Inspect snap links for proper latching (indicates wear). Replace all worn snap links immediately. Inspect for loose or worn grips. -
Page 29: Environment
Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Environment Static Electricity - Depending upon where you live, you may experience dry air, causing a common experience of static electricity. This may be especially true in the winter time. You may notice a static build-up just by walking across a carpet and then touching a metal object. - Page 30 Cybex Eagle 11181 Hip Abduction/Adduction Owner’s Manual Maintenance Page 5-8...
- Page 32 10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexinternational.com • techhelp@cybexintl.com...