Yamaha VK PROFESSIONAL-II 2016 Owner's Manual page 83

to the frame or any metal part of the
snowmobile. This can cause electrical
system damage or A FIRE HAZARD.
 Be sure to pull the lead covers back over
the terminals completely. If the termi-
nals are exposed, they could come into
contact with the frame or a metal part of
the snowmobile and this can cause
electrical system damage or A FIRE
HAZARD.
ECS00651
NOTICE
Use the connecting leads to jump-start
the snowmobile only. Do not use the con-
necting leads for any other purpose.
To start the engine using the booster battery
1. Apply the parking brake and turn the key
to the off position.
2. Open the shroud.
3. Remove the red (+) connecting lead from
the lead holder and move it away from
the black (–) connecting lead. NOTICE:
Be sure to connect the red (+) jumper
cable to the red (+) connecting lead
and the black (–) jumper cable to the
black (–) connecting lead. Do not re-
verse the connections.
[ECS00662]
Troubleshooting
4. Pull the red (+) connecting lead cover to
expose the terminal through the slit in the
cover, and then connect the red (+)
jumper cable to the red (+) connecting
lead.
5. Connect the other end of the red (+)
jumper cable to the positive (+) terminal
of the booster battery.
6. Connect the black (–) jumper cable to the
negative (–) terminal of the booster bat-
tery.
75