Lubrication - Yamaha VK PROFESSIONAL-II 2016 Owner's Manual

Table of Contents

Advertisement

Shifted to right
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
Shifted to left
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
5.
Adjust the drive track deflection to spec-
ification. NOTICE: The right and left ad-
justing nuts should be turned an equal
amount.
[ECS00593]
Drive track
More than
deflection
specified
Left adjusting
nut
Right adjust-
ing nut
Periodic maintenance and adjustment
Less than
specified
Turn in
Turn out
Turn in
Turn out
6.
Recheck alignment and deflection. If
necessary, repeat steps 3 to 5 until the
proper adjustment is achieved.
7.
Lower the snowmobile to the ground.
8.
Tighten the rear axle nut.
Rear axle nut tightening torque:
75 N·m (7.5 kgf·m, 54 lb·ft)
Slide runners
Check the slide runners for wear and dam-
age.
If the slide runners reach the wear limit, they
should be replaced.
1. Slide runner
2. Wear limit height
Slide runner wear limit height:
10.5 mm (0.41 in)
ECS00351
NOTICE
Ride on fresh snow frequently. Operating
on ice or hard-packed snow will rapidly
wear the slide runners.
ESU12199

Lubrication

Lubricate the following points with the speci-
fied grease.
1
2
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vk10fh 2016

Table of Contents