Canon imagePRESS Lite C270 Installation Manual page 921

7. Install 2 wire holders [1] and lead the cable for the conveyor [2] through the wire holders [1].
CAUTION:
Before connecting the signal cable, be sure to turn off the power switch on the host machine and unplug the power
cable from the outlet.
8. Connect the 2 signal cables [1], and turn the ends [2] in the direction of the arrow to secure them in place. Connect
the cable which comes from right side of the Two-Knife Booklet Trimmer to the lower connector on the upstream
Booklet Trimmer. Connect the cable which comes from left side to upper connector.
[2]
[2]
[1]
912
6. Paper Output Options
[1]
[2]