Checking The Installation Space - Canon imagePRESS Lite C270 Installation Manual

Checking the Installation Space

1. Be sure that the feet of the machine are properly set. In addition, be sure to keep the machine horizontal.
2. Be sure to keep 100 mm or more distance from the wall to make enough room for performing the operation.
• When the Copy Tray-R2 is installed
NOTE:
*1 Make sure to provide at least 800 mm of space if you attach one or more of the following: Paper Folding Unit-J1, Multi Function
Professional Puncher-B1, Document Insertion Unit-N1, or Multi-drawer Paper Deck-C1.
• When the Booklet Finisher-X1 + Paper Folding Unit-J1 + Multi Function Professional Puncher-B1 + Document Insertion
Unit-N1 + Buffer Path Unit-M1 + Multi-drawer Paper Deck-C1 are installed
500 mm
or more
NOTE:
*2 Make sure to provide at least 100 mm of space if none of the Paper Folding Unit-J1, Multi Function Professional Puncher-B1,
Document Insertion Unit-N1, or Multi-drawer Paper Deck-C1 is attached.
3. Install the machine in a well-ventilated location.
In a location with a mixture of multiple host machines, be sure to install the machine where the air exhausted from other
machines will not directly enter the machine.
Do not install the machine in the immediate vicinity of any air inlet for room ventilation.
100 mm or more 1
500 mm
or more
2,800 mm or more
800 mm or more
4,900 mm or more
4
500 mm or more
2
500 mm
or more
Safety Precautions