Table of Contents
Advertisement
2. Loosen the nut [1] on the caster of the front side (rear side). Then turn the nut [2] to adjust the tilt.
NOTE:
• Turn the nut [1] clockwise (direction of arrow [B]) to loosen.
• Turn the nut [2] counterclockwise (direction of arrow [A]) to tilt toward the paper ejection side, and clockwise (direction of
arrow [B]) to tilt toward the upstream equipment side.
3. After adjustment, tighten the front and rear nuts [1] of the Caster (paper ejection side).
■ Adjusting the Caster Roller Height of the Folding Unit (for Document Insertion/
Folding Unit)
1. Remove the Folder Front Cover.
• 2 Screws
2. Return the Folder Unit to the original position.
[1]
[B]
[A]
2x
633
6. Paper Output Options
[2]
Advertisement
Table of Contents
