Checking The Contents - Canon imagePRESS Lite C270 Installation Manual

Checking the Contents

NOTE:
• [3] Conveyer Stack Retainer Unit : Not used when the Two-Knife Booklet Trimmer is installed at the same time.
• [9] Screws (RS Tightening; M4x8) : Two of the 14 screws are taped to the Receiver Unit.
[1] Booklet Trimmer X 1
[5] Positioning Fixture B
X 1
[9] Screw
(RS Tightening; M4x8)
X 14
[13] L-wrench (6 mm)
X 1
[2] Receiver Unit / [3] Conveyer Stack
Conveyer Base X 1
[6] Plug Cover X 1 [7] Caster Cover X 1
[10] Screw [11] Power Supply Cord
(Binding; M4x8) X 1
863
[4] Positioning Fixture A
Retainer Unit X 1 X 1
[8] Wire Saddle X 2
[12] Spanner (13 mm)
X 1
6. Paper Output Options
X 1