Sharp FO-2081 Operation Manual page 57

INSTALLING THE SOFTWARE
Windows 2000
1
Click the "Start" button, select "Settings", and then click
"Control Panel".
2
Double-click the "Scanners and Cameras" icon.
3
Select "SHARP FO-xxxx" and click the "Properties" button.
4
In the "Properties" screen, click the "Events" tab.
5
Select "SC1:" from the "Scanner events" pull-down menu.
6
Select "Sharp Button Manager Z" in "Send to this application".
7
Click the "Apply" button.
8
Repeat Steps 5 through 7 to link Button Manager to "SC2:"
through "SC6:".
Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp
Button Manager Z" in "Send to this application" and click the "Apply" button.
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button to close the
screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be changed with
the setting window of Button Manager.
For the factory default settings of the scan menu and the procedures for
configuring Button Manager settings, see "Button Manager settings"
(p.125).
56
If other applications are shown, deselect the checkboxes for the other
applications and leave only the Button Manager checkbox selected.