Sharp FO-2081 Operation Manual page 134

Scanning from the "Scanner and Camera Wizard"
(Windows XP)
The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP
is explained here. The "Scanner and Camera Wizard" lets you scan an image
without using a WIA-compliant application.
1
Place the original that you wish to scan on the document glass/
SPF.
2
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Scanners
and Cameras".
Click the "SHARP FO-xxxx" icon and
then click "Get pictures" in "Imaging
Tasks".
The "Scanner and Camera Wizard" will appear.
3
Click the "Next" button.
4
Select the "Picture type" and "Paper source", and click the
"Next" button.
• If you placed the original on the document glass, select "Flatbed" for the
"Paper source".
• If you placed the original in the SPF, select "Document Feeder" for the
"Paper source" and specify the original size in "Page size".
• You can click the "Preview" button to display the preview image.
• If you select "Document Feeder" for the "Paper source" and click the
"Preview" button, the top original in the SPF is previewed. The
previewed original is sent to the original exit area, so you will need to
return it to the SPF before starting the scanning job.
• To adjust the resolution, picture type, brightness and contrast
settings, click the "Custom settings" button.
5
Specify a group name, format and folder for saving the image,
and then click the "Next" button.
JPG, BMP, TIF or PNG can be selected for the format. To begin scanning,
click the "Next" button.
6
When scanning ends, select the next task that you wish to
perform, and then click the "Next" button.
If you are ready to end the session, click "Nothing. I'm finished working with
these pictures".
7
Click the "Finish" button.
The "Scanner and Camera Wizard" closes and the scanned image is saved
in the specified folder.
SCANNER AND FAX FUNCTIONS
133